Odorcide Fire and Flood Odor Remover Gallon - KingCleaning.com
Odorcide Fire and Flood Odor Remover
Odor caused by fire and flood damage can be difficult to remove because it can affect almost every surface in the building or house. Extensive drying, cleaning and deodorizing are needed in most cases to restore the structure to safe and livable conditions. Odorcide Fire & Flood works through a process of counteraction and absorption to safely, but effectively eliminate the odor. Sold as a concentrate, the product is diluted with water and applied using sprayer and fogger applications.
Designed to work in tank or trigger sprayers on small affected areas or materials such as drapery, upholstery, furniture, etc.
Can be used in wet fogging systems in rooms or large areas that have been affected by smoke and/or water damage.
Directions for Use
Remove all unattached items such as drapes, rugs, furniture, etc. from the affected area. Ventilate the area and dry water damaged surfaces as much as possible (includes carpet if it can be saved). For suspended ceilings, remove the ceiling tiles. If they are not
damaged they can be treated per instructions for sprayer applications.
Charred Surfaces add 8 oz of concentrate per 1 gallon of water
General Smoke Residue add 2-4 oz of concentrate per 1 gallon of water
Water/Flood Damage add 2-4 oz of concentrate per 1 gallon of water.
Apply diluted concentrate to surfaces affected by fire, smoke or water damage. It is important to insure the product reaches the odor source at a concentration equal to or greater than the source of the odor. Absorbent cloth materials must be saturated to guarantee the solution reaches the malodor. If possible, allow the items to air dry (fans or dryers can be used to accelerate the process). Repeat, if necessary, to effectively reach the odor source in all areas.
Close all windows & doors, cover any sensitive items that cant be removed and turn on the central heating/air conditioning system.
Dilute product per instructions and add to the fogger, carefully following the instructions supplied with the unit. Insure all people and pets are out of the area.
Small Rooms low setting
Large Rooms low or medium setting with fans
Large Rooms high setting if not using fans
Fans help force the product into cracks and crevices where the odor source may be difficult to treat. The length of time fogging
depends on the severity of the smoke and the size of the affected area. The concentration can also be varied depending on the
severity of the odor.
All Thornell products are safe for use on any surface. As with any product, follow the label directions. Contains water, proprietary
essential oil blend and preservatives.
Keep out of the reach of children. For external use only.
Effectiveness decreased when using with Chlorine solutions. Always spot test for color fastness.
For flood issues, such as mold/mildew odors:
Locate the source of the odor. For mold odors, the mold is generally visible and should be delt with directly with Odorcide and a fungicide.
Mix Odorcide 210 Concentrate with water or disinfectant/fungicide at the rate of 1 to 16 (8oz. per gallon).
After testing for colorfastness where necessary, apply sufficient mix to cover the contaminated area and to penetrate as deeply as the odor source. For faster absorbtion, this process works best on dry surfaces. For bare hard surfaces, spray bottles or pump sprayers are fine. For carpeted surfaces, Pressure Spray at 40 to 100 PSI, Inject or Pour on. To assure penetration, use a roller or simply walk the product in. Excess product can be extracted once you are confident Odorcide has reached the odor source. If any odor remains, Odorcide did not reach the odor source.
For use directly on fabric or hard surfaces:
Indentify the source of the odor. Dilute Odorcide at the rate of 1 to 64 with water (2oz per gallon). After testing for color fastness where needed, spray the mixture directly on walls, fabrics, etc. Apply sufficient product to cover the entire contaminated area and to penetrate as deeply as the odor source. This process will work best on dry surfaces. If the surface is heavily contaminated with smoke odor, use a dilution of 1 to 32 with water (4oz per gallon) to ensure success.
For use with a fogging device:
Dilute Odorcide at the dilution rate of 1 to 32 with water (4oz per gallon). If you are using a non-handheld device, place the fogging device in the center of the area being treated and apply liberally. ULV foggers are recommended for use with Odorcide.